How to wire from 220V to 110V?

Answer by  sparky35 (196)

To change from 220v to 110v you will need to reidentify one of your hot legs to a grounded or neutral wire and land that wire on the neutral bar. A 110v circuit requires one hot, one grounded or neutral, and one grounding conductor. Replace your breaker with a single pole and you are done.

Answer by  Sparky101 (366)

This task can be easy or hard depending on the existing wiring. The easiest way if you're re-wiring an existing receptacle would be to make one (1) of the hots a neutral at the electrical panel and identify it as such with white electrical tape at both ends. At this point you can install a 110v receptacle.

Answer by  gskv (15)

Its simple to wire from 220v to 110v. To low down that voltage it is necessary to use the step down transformers used for cutting down the voltage.