How do you replace a Ford clutch master cylinder?

Answer by  Atomicrayon (2504)

This is a fairly difficult "repair" job, if you consider yourself a novice i would insist that you contact an automotive expert. You're going to need to kill your car and climb under the cap, you'll notice the master cylinder is held in place by bolts. You'll need fitted sockets.

Answer by  kennethjgoodson (4903)

The clutch master cylinder is going to be locatede on the firewall and it has a hose running down to the transmission. It is two bolts holding it.

Answer by  laura27 (1216)

Located on firewall with hose running down to the transmission with 2 bolts holding it. Fitted sockets are needed. If you are a beginner, get expert mechanic to do job.

Answer by  kennethjgoodson (4903)

You are most likely going to have to take the transmission down and the slave cylinder is inside the housing on the drivers side. 2 bolts hold it in.

Answer by  samisaysalways70 (69)

According to me that if you want to replace a ford clutch master cylinder, you must have to concern a good and expert mechanic of clutch for this to solve the problem properly.