How do you replace a compressor clutch on a Ford e350?

Answer by  Jim62 (28)

First remove the AC belt. Then drain the AC unit and disconnect the lines to the compressor. Next unbolt the compressor from its brackets and replace with the new part.

Answer by  Christian9247 (5042)

This can be tricky. You need to have you vehicle up on a lift to access the underside of it. Sometimes this is best left to the professionals.

Answer by  McCheese (1248)

You'll need to get the truck up on a lift in order to access the compressor clutch. The Ford e350 clutch needs a special tool to remove it.

Answer by  astrojazz (367)

Replacing the compressor clutch is very difficult on the E350. You need to put your vehicle on a lift and access the clutch from the underside.

Answer by  helper3692 (100)

To replace a compressor clutch on a ford E350 it depends on what model it is. Some models, the compressor must be taken off of the vehicle.

Answer by  HRQ (14)

It will require you to remove the whole compressor unit. For that you will have to remove the AC belt and then drain it and remove the lines. After that you will have to remove the compressor bracket. It is difficult and I suggest that let the professionals handle it.

Answer by  awolf1010 (21)

the whole compressor needs to be replaced. it should be taken to a professional,do to emissions hazards. be safe