How do you remove the wheel bearings from a Dakota?

Answer by  worker5380 (44)

Remove the brake caliper assembly and rotor. Remove the large locknut in the hub with a 1 7/16 socket and a LONG breaker bar. Turn the hub over and remove the large snap ring. Take a hammer and tap the snap-ring firmly to free it up in the groove. Once removed drive out the old bearing with a large drift.

Answer by  palmerino (637)

you need to remove all the brake parts and the wheel to get to the wheel bearings. Then they should slide out.

Answer by  ijlalnoor (2656)

You will need to remove all the break parts and also the wheel. Then you will be able to get to the bearings.

Answer by  Amber40 (24961)

Well mot knowing the year or whether it is a 4x4 or not I can't explain the exact process. Typically the wheel is removed followed by the rotor. Then the bearing can be removed.

Answer by  rookie105 (823)

remove the tire and brake caliper, if 2 wheel drive remove dust cover in the center of the rotor, remove cotter pin and loosen nut and wheel bearings will come