How do you remove the grill on a Jeep Grand Cherokee?

Answer by  wrencher32 (80)

The grill is retained by 9 retaining clips. Using a plastic prying devise, carefully pry between the grill and the headlamp mounting module at each of 5 clips. After the upper clips are released, you need to carefully pull forward on the grill to access the 4 lower clips. Using the same prying devise, release the 4 lower retainers.

Answer by  Simo53 (90)

If the grill it attached to the hood there should be some screws or release catch type things on the back to let you get it off. Otherwise if it's attached to the bumper there will again be screws or small release catches but it might be a bit trickier having to reach down.

Answer by  sunilkabin (39)

the grill on the front of a Jeep Grand Cherokee can be removed by first loosing the screws on the font. they are located a bit inside the grill. remove them and pull it.

Answer by  McCheese (1248)

You'll have to open the hood and remove two small screws holding the grill in place. You'll need a flathead screwdriver. The screws are really small.

Answer by  jessydav (550)

Get eye level with grille so you can locate the four mounting screws. Locate them they will be torx headed. Remove them. Lay screw driver down. Stand up and grasp grille lean top out towards you thennliftand pull out.

Answer by  Randy76 (95)

I own a Grand Cherokee Limited and the grill is easily removed by screws on the top in the engine compartment and also a couple of screws on the front side of the vehicle.

Answer by  JeremyC (30)

1. Remove the three exterior screws with a 7mm socket. The screws are located inside the lower front part of the grille. 2. From inside the hood, remove the four 7mm screws located along the top of the grille. 3. Next pull the grill from the vechile, might take a little tugging.

Answer by  Taran (716)

The grille is incorporated into the fascia Disengage retainers attaching grille insert to grille/fascia. Separate grille insert from grille/fascia