How do you remove the blower fan motor from a 96 Jeep Cherokee?

Answer by  Atomicrayon (2504)

This isn't an easy car repair, so if you consider yourself a novice mechanic i would suggest taking it to a car shot. If you've got some "skill" per say you can open up the hood and remove it manually from there. Make sure the car is turned off. Locate the fan and begin removing the screws.

Answer by  cab13 (8)

The blower motor is under the passenger side dash and requires 4 bolts to be removed 2 wires and hose pulled out. This is very simple, total cost $60. 00 and your time.

Answer by  Liz59 (10966)

Well, you can remove the blower fan by opening up the fan departments. Then carefully take out the part with your screwdriver.

Answer by  kennethjgoodson (4903)

You are going to want to disconnect the battery and then undo the belt going to the fan. Loosen the bolts on the motor and take it off.

Answer by  ladybud (1069)

On your fire wall is a round fan motor with 4-8 screw's.Remove the Electrical wire's and unbolt the fan motor.If it is glued take a flat head screw driver and use your palm and tap it a few time's.

Answer by  James916 (539)

The blower fan motor should be either under the dash on the passenger's side, or on the firewall in the engine compartment. You need to remove the bolts holding the fan motor in and you need to disconnect the electrical connector, usually a two prong connector. Then the fan can be removed.

Answer by  JRossi17 (788)

To get the blower motor out you have to remove the entire dash setup all the way to the windshield. Once you do this the blower motor should be located on the passenger side in the middle of the firewall. Its usually a big white box thats open on top.

Answer by  Milenko (17)

first take the glove box out and it should be in a case right inside undo the plugs that go to it and the bold that hold it on there