How do you remove rotors on a Honda Element?

Answer by  Atomicrayon (2504)

Start by checking/changing the obvious and perhaps even consult your dealership or local automotive shop/expert. You can find most of the parts that you're going to need online or at your local auto store. This is a long and expensive process. Remove the tires and the brake pads.

Answer by  Amber40 (24961)

First remove the wheel, then the caliper. The rotor should then slide of unless there are small screws still holding it on. If so remove them then slide it off.

Answer by  Amber40 (24961)

Start by jacking the car up and putting it on jack stands. Remove the wheel then remove the brake line bracket. Then remove the bolts holding the caliber on and tie up the caliber to keep weight off the brake line. Then remove the two screw holding the rotor on then just pull it off.

Answer by  Steven (309)

You need to get the brake calipers completely removed from the Honda Element Rotors in order to actually remove the rotors themselves. Once this is done, there is only one bolt left to remove on the rotor.

Answer by  laura27 (1216)

Remove wheel then caliper. Rotors should slide off, if not check to see if it has small screws. Take small screws out and remove the rotors.