How do I remove the seat of my Honda Magna?

Answer by  Birder80 (181)

if you look on theleft hand side of the bike by the end of the seat is a key hole this is the helmet lock, use you ignition key and open the helmet lock. after the lock falls down you will see a small lever inside, pull the lever towards you and the seat lifts off.

Answer by  desmondr (7)

the 1985 v 65 magna all you have to do is turn the helmet lock key to open and lift the seat off, it goes back on the same way then lock the helmet lock to hold the seat.

Answer by  bmc239 (70)

Remove the bolts holding the seat on then open the seat and remove the pins that are held by cotter pins.

Answer by  silverkatcreationsyahoocom (324)

Seat is clipped on. Gently pick up along the edges being careful not to break any clips. Takes time and patience but basically snaps off.

Answer by  Nick83 (11)

Remove the bolts holding the seat strap on. They're also the seat mount bolts. If it has cotter pins, open the seat and remove 2 cotter pins.

Answer by  dancprncss6 (59)

On most you can remove the side panels and reveal bolts that you remove. Some come with a keyswitch or a little lever under the back of the seat.