Question by  mangareeeder (18)

How do you clean a HP laserjet?


Answer by  randall6 (242)

Most of the time during the software install, a cleaning utility is installed. You will normally find this utility under the HP programs pointer. Open this utility and choose to run a nozzle test and also choose to clean the print heads. You may have to repeat the process a couple times to have success.


Answer by  SallyJ64 (3121)

Always start by running any of the diagnostic tests that are built into the printer. It's important to keep in mind though that laserjets don't have nozzles that get clogged like in an inkjet so there's less that you can do. If there's some toner that's spilled out, just take a dry paper towel and wipe it up.


Answer by  ahsanmahmoodawan (1169)

cleaning laser printer is easy and don't take much time dempan a cloth with water while printer is turn off remove the printer paper trat clear inside toner of the printer with a dry cloth and wipe away the dust and it is better to change the cartage of the printer


Answer by  NTKuan32 (131)

Clean the outside with cloth or fabric, open the cover and wipe the surface inside, then try to download HP laserjet cleaning utility from HP website and run it


Answer by  PeZook (35)

Best bet would be to pay a professional ; Printers are complicated devices. Basic maintenance should include swabbing the rubber transfer wheels with alcohol, and wiping any dirt with a soft cloth.


Answer by  gigo (1706)

Most common place for dirt is the paper roll. You can take it out and clean it with cleaning alcohol and a clean cloth.


Answer by  Joe31 (16)

You can clean a LaserJet by vacuuming out the printer and using the LaserJet's self-clean sheet available from the printer setup screens.


Answer by  marbozon (93)

The cleaning procedures for an HP LaserJet will vary depending upon the model. Your best bet is to look up the model type on HP's website where maintenance instructions will be available for you.

You have 50 words left!