How do I put a fuel filter on a Ford Taurus?

Answer by  Jaredl721 (35)

Locate the inline filter, located on the fuel rail near the rear of the car, close to the gas tank. Unscrew filter, utilizing special tools available for rent from Autozone for free. Attach new filter and test for leaks.

Answer by  Amber40 (24961)

Start by warming the engine up then locate and remove the oil drain plug. Then use the appropriate wrench to remove the oil filter. Then clean the filter surface and put a bit of oil on the gasket. Then screw it on and install the drain plug. Then refill the engine with oil.

Answer by  TravisUSMC (979)

It's located on the driver side, about 2 feet from the gas tank along the frame of the car. Disconnect the lines on both ends of the old filter. Remove the hold down screw. Install the new filter by reversing what you just did.

Answer by  bikerbojo (282)

Look under car on frame rail and locate fuel filter. You will need a special tool to remove the keepers that hold the fuel line in place. Remove the keepers and replace filter then replace with new keepers usually supplied with new filter.