Why does my Brinks keypad beep every morning at 3:25?

Answer by  Anonymous

If you don't have service, Brinks panel tries to communicate with service and alerts you every 24 hrs. Get service or pull plug and battery. If you like non monitored, let it continue to beep and cancel it during day so it beeps during a time where you can cancel.

Answer by  mightyspidey (1080)

It sounds like at some point, you or someone else (previous owner/user?) programmed an alarm to go off daily at that time. You will need to cancel/diable the alarm in order to stop the beeping.

Answer by  jennibii (184)

Check to see if your keypad has an alarm set. If it is used, the previous home owner may have set it for that time. If you do not know how to change it, I'm sure you can just call customer service and they can tell you how to do so.

Answer by  vtrn (18)

zone number shows up with the BAT warning, this indicates that there is a wireless detector that has a low battery. prevent a good connection to the battery

Answer by  Anonymous

On an unmonitored system, set your alarm and then open a door or window to make your alarm sound off. Then put your code to turn it off and hit cancel. Your panel will then beep 30 minutes later, just hit cancel. It will beep every day at that time

Answer by  arthy (99)

Because your keypad may already set it in the time for alarm. Else other persons may se the alarm for their own use. If this keypad is a secondhand the first one make the alarm for that time. unfortunately you may have to set the alarm for your own use and forgot it.