PC2 won't eject disc, what should I do?

Answer by  x15ruben83 (13)

First you should locate a tiny hole on the front of the console, then insert and push a straightened paper clip into the hole. The drawer should then pop open far enough for you to grab the drawer and carefully pull it outward.

Answer by  Edfire (120)

Some would try to open the CD drive with a butter knife or something stupid such as that. What ever you do DO NOT DO THIS!. You can damage the device even more, simply call up the company and send it in for repairs. It may coast you some money but you dont want to break it anymore.

Answer by  smashead (5)

On the front, below the tray there is a tiny hole, use a paper clip and put it in that hole, should release the tray.

Answer by  IHopeYouMeanPS2 (5)

There should be a tiny hole big enough to fit in a paper clip in front of the console. Stick it in and the CD tray should pop right out.

Answer by  drkgeek (14)

You should find a tiny hole on the front, then insert and push a straightened paper clip into the hole. It should open enough to pull it out.

Answer by  Amber40 (24961)

Well if you search online there are a few tutorial that show you how to manually eject a disk. It involves disassembling the case.

Answer by  rockdisc (209)

I assuming you meant to say PS2 instead of "PSC2" You could open the case and take out the disc yourself every single time. No body sells spare ps2 parts.

Answer by  nala347 (56)

Your motor is probably dead, I would suggest either buying a new PS2 or paying to repair it, this isn't an easy fix.

Answer by  67565fsdf (67)

Your disc tray may simply be jammed, or stuck shut from stuff building up on the tray. Hopefully your drive's motor hasn't blown. In any case, PS2s are notoriously resilient and you could probably pry it open with something thin. Even if the drives motor is blown, if the drives laser still functions you can manually cycle the drive.

Answer by  Tudor (98)

if the ps2 does not eject the disc , then you must unplug it form the power source and try to unscrew the console and try to find the problem. If you aren't very good at this kind of stuff then i recomend you take it to a specialist