How do you unhook the water line of a refrigerator?

Answer by  Kimberly (253)

First thing shut off the power to your refrigerator off. Then you need to close the what is called the inlet water line then pull your refrigerator forward go behind it then close the water off and unhook. Make sure there is no clutter in the way and clean it.

Answer by  ujwalraimjoshi (729)

switch off power supply of refrigerator. close inlet water line. pull the refrigerator forward. go behind. close water off and unhook.

Answer by  reflex (278)

To unhook the waterline from a refrigerator you first must move the refrigerator carefully from its position not to break the waterline hooking up to the refrigerator. Carefully take a wrench and turn it counterclockwise, dont forget to turn the waterpipe off or water will spray everywhere.

Answer by  Isidro (624)

The best way to do this is to turn the refrigerator around and there should be a line there you twist and turn the back and then it should be free.

Answer by  Tim55 (618)

Before doing this task remember one thing. Shut off the water line first. Slide the refridgerator out and there should be a clear tube, or frosted tube of plastic, unclasp it (do not snip) and you should be good to go.

Answer by  HelpfulAndy (1107)

Turn of the refridgerator, then slowly pull it away from the wall and look for the water line. It should just unscrew like a hose.

Answer by  Jim88 (103)

Make sure your area is free from debris and clutter. Have some towels for gathering any water that seeps from the waterline. Find the water shutoff valve and turn it off. Using a medium size wrench, loosen and disconnect the waterline. Wipe up!

Answer by  heather88 (1897)

There should be a hose in the back it will be maybe screwed on you will need a rench to get it off. or ask a person who insalls them.

Answer by  tgle104231 (27)

Locate the shut-off valve for the water line. Shut the water off, use a pair of adjustable pliers or small pipe wrench to turn it counter-clockwise to loosen and remove.