car repairs






 

Question by  woody (65)

How do you take a Mitsubishi WS 65313 apart?

I need to take my Mitsubishi apart.

 
+9

Answer by  busyfingers (239)

You will need to locate the screws in the outer casing. These will be marked but may be a little difficult to find as they may be concealed. Remove them and take out the casing. Now the TV is all yours to mess around with! Please be careful!!

 
+6

Answer by  jeyR (264)

If you do take your Mitsubishi WS 65313 apart yourself you will void any warranty on your TV and run the risk of damaging more parts in it. If you're a tech pro to some extent it's OK. Otherwise it's better to take it to an authorized Mitsubishi service center.

 
+5

Answer by  kennethjgoodson (4903)

The best thing to do is to get an owners manual and look at that before you start taking it apart. Another tip is to color code the bolts.

 
+4

Answer by  Liz59 (10966)

Well if you need to take the car apart, you can start by opening up the engine parts. You want to start with the pressure switches I believe. There is a great do it yourself book available on ebay if you need picture instructions as that will help a lot.

 
+4

Answer by  princess88 (166)

There's two screws in the top of the cowl housing on top, remove the bezel and remove the 4 screws holding in the instrument cluster. Or you can always use your manual if you don't have one carry it to your local dealer they will be able to assist.

Reply by digmyspace (249):
Yes, your manual will show the location of these screws. Hope you still have the Mitsubishi WS 65313 manual with you. If you don't, you can find the manual online on some tech or TV forum. All the best!  add a comment
 
You have 50 words left!