Snippets.com - Short Answers






 

Question by  Irliol (25)

How do you replace a timing belt on a Mitsubishi Eclipse?

 
+6

Answer by  Amber40 (24961)

Start by removing all the accessories in front of the timing cover. Then unbolt and remove the cover. turn the engine to line up the timing marks then remove the chain tensioner. Then the belt itself. Then reverse the process with your new belt.

 
+6

Answer by  Amber40 (24961)

Start by removing everything in the way of the timing cover. Then simply move the tensioner and pull off the old belt. Then slide on the new one and reverse the process. Be careful when changing belts to not let either cam turn or it could throw off the timing.

 
+5

Answer by  turborotary91 (256)

u first have to remove the timing belt cover "black plastic on most likely driver side" then u have to loosen the bolt or nut on the tensioner pully" will have a spring attached" then it should come right off. u may have to remove the valve coveron top ofengine

 
+5

Answer by  MechMan3 (885)

disconnect the battery. remove the timing belt cover. set the engine at top dead center and align the camshafts and crank shafts. loosen the tensioner and remove the timing belt.

 
+3

Answer by  bb (674)

check the owners manual for the timing marks. damage can result from not setting the timing properly when installing the belt.

 
You have 50 words left!