How do you replace a Ford Explorer windshield?

Answer by  dee73 (1062)

First remove the mold from around the reful remove the interior trim and cowl panel. With a razor blade carefully cut the sealant and remove the windshield.Now you need to clean off the excesive glue. You are ready to place new glue on the weather stripping and windshield, once that is done you can put in place and let dry.

Answer by  tkarlav (1502)

You care fully remove a pillar interior trim and a cowl panel covering cut the sealant with a tool and remove the windshield. clean off ecseive glue and your done.

Answer by  eyeguy (3760)

The Explorer windshield is held in place by four metal clips and simple screws. Once they have been removed the only thing holding the windshield in place is the rubber trim

Answer by  cgrid76hotmailcom (545)

Remove the mold arround the window .Then take the wheatherstriping off .try and take an old piano string to do this from the inside of the car wedge the string threw