How do you make a wrestling ring?

Answer by  MatthewBanville (21)

Keep in mind that when making a wrestling ring safety will be the biggest concern in it's use. To continue, a typical wrestling ring that you would see on television is an 18x18 square. The mat should sit about 3 feet off the ground. I would suggest steel over wood.

Answer by  glennm12345 (140)

The official dimensions of a wresting ring is 20' X 20'. Top rope is 5' high. The mat is 4.5' off the ground.

Answer by  technogeek (6640)

If you are referring to a professional wrestling ring, WWE usually uses a 20' ring so each side, corner to corner, would need to be 20' long. The ropes will need to be about three feet high, with a foot of space between each rope and that should do it.

Answer by  technogeek (6640)

Corner to corner, the ring will be between 20 & 24 feet square, three feet off the floor and the ropes will be five feet above the canvas.

Answer by  Abirami (7)

it can be as theatrical as it is athletic. Measure out size of youSet your ring posts,corner of the ring. Most wrestling rings measure from 14 to 18 feet squar