How do you install a water pump in a 1997 Chevy Camaro?

Answer by  Maddog69 (6)

With the old water pump out line up the new one with the bolt holes. Install bolts using the proper tightening pattern.

Answer by  GeneWeen (120)

You must first locate the water pump. After you have done this, you must remove it, remember to disconnect thr battery leads. After you remove the screws, you simply replace the hoses and the pump with your replacement. Reconnect the battery and proceed as you would normally. Check periodically to make sure it is ok.

Answer by  lee614 (8)

unbolt the water pump from the block remove the water pump replace the gasket and mount the new water pump on the block and toque the bolts

Answer by  Jakecutter (1819)

All you need to do is open the hood of the car. make sure you secure it up. Then you can remove the old water pump and replace it.