How do I repair link pins on my car?

Answer by  amtcura66 (1340)

You repair them by going to buy new ones. Then go back to your car and take out the old ones and putting the new ones in. Dispose of the old ones and then start your car to see if it works okay. If not then buy more and try again.

Answer by  doc325 (454)

Stabalizer links cannot be "repaired" The must be replaced. Depending on the type they may be mounted to the strut and the sway bar or may be mounted between the sway bar and the control arm.

Answer by  EdnaS (92)

Link pins typically hold the horizontal axle in place and are critical to transferring power down to the steering weels - although this varies from car to car. You will need to elevate the car at the front and remove both the wheels and brake assembly. From there, you can locate and replace the pins.

Answer by  japratt (1687)

If you are wanting to repair these type of pins on your car then you will need to take all of them out before you decide to do any repairing at all. You will then need to have the repaired by a dealer and then you will be able to put them back in.