Question by  mathubex (16)

How do I bleed the brakes on my Kawasaki Ninja ZX9R?


Answer by  annie52foof (1459)

First you must loosten up the break bleeder on the break and then squeeze the break until the air is out of the line. Then tighten back up.


Answer by  Amber40 (24961)

You bleed them like you would any other bike. You will need to add fluid as you open the bleeder screws. However you can buy speed bleeding kits that help you bleed them yourself or allow you to do a reverse bleed. It isn't a hard job but you need to keep air out of the system.


Answer by  Gsxr1100 (34)

The vacuum bleeder's are a great investment. I own one.Cheap too.Clear the reservoir of any old fluid and junk that build's up in there w/ Qtip.Attach vacuum line to bleeder valve.TRICK: apply a couple of round's of teflon tape to bleeder screw neatly..! Seal's great. Now bleed a perfect system...:-}

You have 50 words left!