Can you tell me how to wire up brake light on an F?

Answer by  rosieposey78 (1304)

Wiring the brake light with Switch F can be facilitated with the use of shims between the switch and behind the back of the master cylinder. A shim is simply a thin piece of metal like an aluminum can strip. If it doesn't work, replace the switch.

Answer by  salsafoodie (3146)

One of the best way to light up to the brake up is to wire it through the transformer and into the F socket.

Answer by  Jimbob (2275)

You simply need to find the wiring diagram for the tail lights and find where the leads come up. You may want to put an in line fuse in the wiring depending on if you take it through the fuse box. The wiring diagram will point you towards the tie in point.

Answer by  StarOne (941)

Search the internet for "How to wire a brake light". You can get step by step directions. Your local auto parts store where you will buy the equipment needed to do this job can also help you. You will basically install a switch at the brake pedal and wire it to the fuse as well as the brake light.