Question by  baytweezie13 (3)

Why won't my RCA projection TV stayed powered up?

It powers up then turns itself off after about five seconds.


Answer by  Liz59 (10966)

There must be a manufacturing defect if the projection won't stay on. Other than that, are your wires aligned properly and put in the proper spots? This is essential for focus.


Answer by  samimi (32)

This sounds like a problem with the power supply. The power supply could be over-heating and automatically shutting itself off to save the electronics in the TV. It might be best to take the projector to a repair shop and have them look at it. It's cheaper to replace a power supply than the whole TV :)


Answer by  jcheatham (65)

Check to make sure that your power supply is working. Also, make sure that you don't need to replace your light bulb.

Reply by baytweezie13 (3):
if the power supply is bad would it "click " on and off 3 times like that the green light on the power button does turn on each time it clicks it just doesnt power up  add a comment

Answer by  rube26105 (379)

Your setting are wrong on the "guts" of the television somewhere inside. If you call the RCA people online or local, they could have you up and running

Reply by baytweezie13 (3):
it was working then it got turned off and wouldnt come back on it did it once b4 but after unpluggin it and playin around it turned on this time it wont would it do that if the "settings" was wrong?  add a comment
You have 50 words left!