What's the best way to clean an enamel bath?

Answer by  martine (860)

Most bathtub cleaners should not be too abrasive. I would use a scrubbing bubbles cleaner, works well but is not too rough on the surface. Scrub brushes tend to have a good effect to get the bathtub surface clean. With these you could use a good orange oil spray and it should come very clean.

Answer by  wms10 (93)

Don't ever use scouring cleaning products. The best way to clean your bath is to use cream based cleaning products and/or a Mr. clean Magic Eraser .

Answer by  kavinvk (34)

You can basically use anti soap scum sprays, in this way it is easy and less scrubbing will be needed, and you can use bleaches and other cleaners like OXYCLEAN, but the bleach will make the enamel look brighter. If you prefer you can add an extra polish or an Enamel coating so it looks as good as new.

Answer by  HARSHADMODI (7)

For that first you have to Emty the bath, and than you have to ware hand glose. After that with cleaning creem you have to apply on the surface of the Bath room. Than with warm water you have to Scrub the surface with Fom rubber.than for polishing the surface you have to use soft cloth or towel paper.