electronics






 

Question by  Mike (43)

What is the process for setting up a radio?

I need to set up a radio.

 
+7

Answer by  BigB (29)

Remove the radio from the packaging and plug it into an outlet. Once the unit is powered up, adjust the dial to an FM station in your area to begin the listening experience. If you wish to listen to AM stations, an additional antenna may be needed, which can be purchased from any electronics store.

 
+7

Answer by  worker3350 (49)

Depending on the type of radio it is you may need to set up speakers and anttenaes. As far as the anttenae make sure to put it in a spot where there is very little in front or around it.

 
+2

Answer by  Sabharish (1610)

Connect the power cord of the radio to a power socket and start tuning the radio for required frequency using the radio tuner.

 
You have 50 words left!