What is involved in preparing new lot for grass?

Answer by  Craig19 (154)

First, spread a 1 inch to 2 inch layer of topsoil over the bare ground and till this into the dirt about 6 inches deep. Then fine grade the dirt with a three to four foot wide rake. During this process, remove all rocks. At this point, the ground is ready for grass seed or sod.

Answer by  answerqueen (564)

Kill all exisiting vegitation on the property with a non-residual chemical such as roundup, then work the ground w/a rototiller or the like, smooth out the ground and then spread your grass seed, cover same w/straw and water.

Answer by  Rani60 (351)

The importance of preparing the soil for a new lawn cannot be stressed strongly. Then to remove any large objects that are on the soil surface.

Answer by  Latin4 (11170)

Burn off the old grass. Till dirt and get rid of clumps. Mix grass with some dirt and spread over area. Lay straw over seed until grass appears.

Answer by  eyeguy (3760)

The soil must be moist and soft as possible. The new grass will root faster and more uniform if its starts in the right soil base. Chemicals and powders are not advised.