Question by  LittleBAK (26)

What is involved in an expansion tank installation?

This is for my water heater.


Answer by  TheRealPlumber (249)

You will need to shut the water at the main valve. Cut in a tee fitting at the hot water output of the water tank and screw in the new expansion tank.


Answer by  StarOne (941)

Instruction should have been included when you purchased your tank. If there were not contact the manufacture. You should be ale to obtain step by step instructions for your job. You need to make sure that your tanks pressure is the same as inlet water pressure. The tank will be installed on the cold water line.


Answer by  harper2583 (466)

Well its not really that ahrd to do it but you are going to want to have some free time.

You have 50 words left!