Question by  emp (263)

How to replace a video card for an emachine computer?

The video card in my emachine is not working properly.


Answer by  worker5825 (96)

First thing is to find type of video card your computer supports. Once you find out what type of connection it uses (PCI/AGP/PCI-E/Other), you can purchase a replacement from a reputable vendor and simply open the case, remove the old card and install the new one.


Answer by  worker6280 (78)

If it's onboard, you can just install a compatible card in an available slot. If there's a separate card reomve and put in one of the same type.


Answer by  kd97 (733)

Begin by turning off the computer. Unplug it. Remove the computer's case. Remove the old video card, and install the new one. Make sure the slots match! If you are upgrading from PCI to an ISA style, find a PCI slot to insert it into. Reconnect the monitor and plug in the computer. If you see a display, it works.


Answer by  Amber40 (24961)

Well first you need to figure out what kind of card is in your pc. Then look online for one that is the same style. Then install it along with any drives that came with it.


Answer by  japratt (1687)

If you are wanting to replace the video card in your machine then you will need to first take out all the screws. Then you will need to take off the panel of the computer. After that you will need to remove the old video card and put the new one in.

You have 50 words left!