How to hook up a stereo system to a car?

Answer by  mdjames26 (533)

If you are just installing the head unit then it is simple. Pretty much you take out the old one and disconnect the wires and then do everything in reverse with the new one. Make sure you check all of the wiring harnesses before you screw the assembly back in.

Answer by  Amber40 (24961)

Follow the directions included with the stereo. There are also website online that can give you a few tips on what needs to be done. You can do it yourself but make sure you know what you are doing before you start. There are a lot of things to keep track of so do your homework first.

Answer by  Raf (146)

Its actually very simple. You can pick up literature anywhere. I suggest Car Audio for Dummies, get yourself a 12 volt tester, scissors, and electrical tape. Good luck.

Answer by  japratt (1687)

You will need to take off the covering from current speakers and then hook up the new speaker system in it's place.