How do you tighten the torsion bar on your Mazda truck?

Answer by  jkareckygmailcom (85)

Under the truck there should be an adjustment on the rear of the bar. Tightening or loosening the adjuster should raise and lower the front ride height of the vehicle.

Answer by  Xceptional (642)

You can use either a crescent wrench, or you can use fitted sockets for the job. IF you have weak arm strength you might need a power drill.

Answer by  champaign9497 (11977)

That has to be done with a torque wrench you will need to contact the dealer find out how much torque to put on with out making it too tight.

Answer by  MechMan3 (885)

DOnt mess with it. You can endanger yourself and your passengers. If you don't know how to do it, get a professional. It's not worth dying over.

Answer by  laura27 (1216)

Get under the truck where you could adjust the bar on the rear. You can loosen or tighten it to raise or lower the front of the truck. A torque wrench tool is needed. I prefer you to contact a local dealer to see how much torque you need to use so it want be screwed on too tight.