How do you replace spark plugs in a 2004 Toyota Solara SLE?

Answer by  MarkGress (479)

Use a spark plug attachment and attach it to a ratchet, remove all plugs and gap and install the new plugs.

Answer by  dave3344 (33)

To plug in a 2004 toyota solara SLE you pop the hood and make sure the key is out of the ignition and plug it in.

Answer by  DM (228)

You'll need a standard 5/8" spark plug socket. Get one specifically for spark plugs- the rubber boot inside will let you easily pull the plug out of its difficult-to-reach spot on the block. Simply remove the plug wire and ratchet the plug out!

Answer by  kennethjgoodson (4903)

Your spark plugs are going to be under the plate that says Toyota. You will pull that cover off and the spark plugs will be under that. You can use your regular spark plug socket.

Answer by  jay34 (250)

Open front hood. get orange wires that connect to spark plugs. Pull wires off .get spark plug socket ratchet and unscrew plug. Reverse proceedure to put new one on.

Answer by  cody (1331)

when you want to change spark plugs in a 2004 toyota first you get a deep well 3/4 socket or a 5/8 socket and you use a socket wrench with them.

Answer by  Amber40 (24961)

First remove the engine cover. Then remove each coil pack. This should allow removal of the plugs. Install the new properly gaped plugs with a bit of anti-seize.