How do you install a Sony Xplod 2 Channel 1000 Watt Car Stereo Amplifier?

Answer by  thelostone (1457)

PArt of th einstall is deciding where you are putting it. You wil need ot run some wires from your radio to this location. Also you will proabbly want to run a new power lead from the battery to the amp for power.

Answer by  Atomicrayon (2504)

You're going to need some wire strippers and a basic understanding of cable and electrical work. You'll need to find a suitable place for your stereo. Run the cables in question through the cab to the battery and firmly attach them to the fuse box. The rest is cut-and-paste.

Answer by  highroller (57)

Choose the spot where you want your amp. Disconnect the ground (negative) cable from your battery.Attach the side with the fuse of the thick positive (+/red) power cable to the connector. Run though your firewall.Connect the ground to a screw in your car. Remove head unit run the rca from the amp to the rear of the head united.

Answer by  kennethjgoodson (4903)

You can install it in the trunk or under the back seat. The best thing to do with the wires is run them in the door molding to up under the dash and then to the cd player.

Answer by  laura27 (1216)

Need strippers. At least have basic knowledge of cables and electrical. Run cables through cab to the battery and then firmly attach to fuse box. Then cut and paste.