How do I replace my outside window caulk?

Answer by  nate1 (146)

First, remove the existing caulk by cutting away with a utility knife. Clean all excess debris, and loose material from the surface. Cut the caulking tube at an angle to expose a hole of approximately one quarter of an inch. Apply in a steady bead from corner to corner. Using a rag, wipe down to finish.

Answer by  sswork11 (184)

First you will be to remove any old caulk that is remaining. The best way is to use some type of scraper. Depending on the window a square edge scraper might be best, or simply use an old screwdriver. Wipe off any remaining dust and apply caulk in a continuous bead. Prime and paint as needed.

Answer by  MrHardware (369)

Use a utility knife and carefully cut the edge of the caulk as it meets the window frame. Then using a putty knife, scraper, or 5-n-1 glaziers tool work at scraping the old caulk off the window. Using a caulking gun run a bead of good exterior grade caulk along the seams. Use a wet finger to smooth the caulk.

Answer by  thattractorguy (2970)

Use a utility knife to cut the old caulk out. Then put a bead of new caulk into the gap. While the caulk is still wet, moisten your finger and run it along the caulk to create a smooth surface.

Answer by  dpauleyii (843)

Remove the old caulk with a razor knife. Once that is done, clean the area completely. You can then add the new caulk in the areas of need.