How do I repair a leaky bathtub/shower combo faucet?

Answer by  JohnHolmes (2660)

You will need to remove the wall and install new piping or repair the old piping that is in there. This may be difficult but it is the only permanent fix for your problem.

Answer by  fislamamt (189)

Just find a wrench and use it unscrew the bathtub/shower combo faucet . Find an appropriate replacement and fit it again wih the wrench

Answer by  stinkymess (310)

Replacing washer on bathroom faucets are a quick way to fix a slow leak. Remove the exisitng faucet set with a wrinch and check the old washer for worn spots. Clean around the area to remove all debris. Replace the old washer with the new one. Replace the faucet and tighten.

Answer by  AmosPressley (95)

Ususally, the best thing to do is replace the stems. These include hot and cold valve stems and a diverter, if you have one. Make sure the water is turned off and the system has no pressure. Carefully remove the old stems and replace with new.

Answer by  Nick32 (5)

The easiest way would be to call a local plumber from the yellow pages, or one found through google or another search engine online. If you consider yourself a handy person, you could maybe buy a book somewhere that would give you detailed instructions on how to do it yourself.

Answer by  georgekutty (173)

Yes we can repair the leaky bathtub. First of all we identify from were the leak out,then discharge the wate0r. Proper mixing mseal and eraladate on the leaking part.