car repairs






 

Question by  schilke (22)

How do I remove the dash in a GMC Envoy?

 
+6

Answer by  Gracie527 (14)

If the vents are directly above the radio, that panel is one piece and should come off by grabbing the top of both vents and pulling the panel towards you away from dash. Once panel is off, disconnect all wires, unscrew bolts by factory radio, pull out unit and unplug wiring harness.

 
+6

Answer by  priya68 (12)

Remove all the screws. The steering wheel should be put down. Pull the panel off by starting from the left. The light harness should be disconnected. 2 clips are on each side. The panel should be bend down to get out from the dash.

 
+4

Answer by  oui72 (514)

There are two ways of removing an Envoy dash. The expert's way: removing all the clips, screws and bolts hidden around the dash. Of course, you have to detach the cables from battery terminal to avoid unwanted short circuit and popping airbags. Or, the junk man's way: use a chainsaw and by then you'll have a new Envoy.

 
You have 50 words left!