cars
 

 cars  diy







 

Question by  duggielanger (44)

How do I rebuild a carburetor?

 
+7

Answer by  Jovanix (25)

If you buy a rebuilt kit, they come with directions about where the parts all go. A good tip I suggest, is to lay everything out on a towel, this keeps parts from rolling away, especially if ball bearings fall out when upside down. Don't over tighten bolts.

 
+6

Answer by  Wrenchman (638)

Remove it from the manifold, disassemble it, spray carb cleaner through all the jets and passages, reassemble, using a rebuild kit to replace any worn parts and gaskets.

 
+6

Answer by  Amber40 (24961)

The best thing to do is purchase a rebuild manual then buy a rebuild kit. This will eliminate a lot of guess work, part shopping and the manual should describe the entire rebuild procedure in detail. Make sure the manual has a lot of pictures for reference.

 
+6

Answer by  Amber40 (24961)

Really this all depends on what type of carburetor you need to rec=build. The best method is to go and buy a rebuild manual for your carb.

 
+5

Answer by  CountZero (5)

Once you've taken out the carburetor, remove the fuel bowl, and then take out the float hinge pin. Clean and dry all the parts and put it back together.

 
+5

Answer by  palmerino (637)

buy a rebuild kit for your model carborator. take the carb off the engine. take it apart, clean all metal parts with carb cleaner, and use piano wire to get in the holes. then replace all the seals.

 
+4

Answer by  JD17 (424)

To rebuild a carburetor go to a shop and buy the rebuild kit. The inside of the rebuild kit box will have full details on how to fix it. This is a really simply you should be able to do in about 3 hours.

 
+4

Answer by  Justin25 (29)

The easiest way to repair a carburetor is to obtain a manual from the manufacturer. Next, find a repair manual and order the required parts for your carburetor. Not all will be repairable, in which case you will need to purchase a new one.

 
+3

Answer by  japratt (1687)

If you are wanting to rebuild this piece of equipment then you will need several different parts. You can get these parts from your local dealer or from a retailer.

 
You have 50 words left!