car repairs






 

Question by  fleisfitch (11)

How do I put a fuel pump on for a Galant?

 
+6

Answer by  tkarlav (1502)

remove the access panel from under the rear seat. undo the hoses and conections unbolt . then replace with a new one .

 
+6

Answer by  thattractorguy (2970)

First you will need to remove the rear seat cushion. You will then see the top of the pump and the tank. Disconnect the wires and fuel lines. Remove the retaining cap and fuel pump. Installation is the removal in reverse.

 
+5

Answer by  dee73 (1062)

All you need to do is remove your rear seat cushion from the back seat, once that is done you should be able to see the top of the pump. Remove the wires and fuel lines.Remove cap and the pump.Once you remove the pump you are able to install the new one, reverse the steps to put back together.

 
+5

Answer by  dee73 (1062)

Remove your rear seat cushion. Once you do that you should see the top of the tank and pump. Remove the lines and wires. Remove the pump.

 
+4

Answer by  McCheese (1248)

The Galant is an easy car to work on. All you need is an adjustable wrench to remove the old fuel pump and replace it with a new one.

 
+4

Answer by  Amber40 (24961)

Well if you had provided more information about your car I could have given you a rough description of how to do this. However I can only suggest how it is done. More than like you will have to access the gas tank and remove the in tank pump.

 
You have 50 words left!