How do I fix an inner cv joint that knocks with acceleration?

Answer by  Jimbob (2275)

The joints just get worn out with time and you have to replace them. They are fairly easy to take out although they do require some time. The knocking that you hear means they are worn out.

Answer by  Amber40 (24961)

Typically you cannot rebuild or repair a worn cv joint. More than likely you will need to replace the entire half-shaft assembly. This means removing the wheel and some suspension components to get to the shaft. Then you can remove it and install an new shaft and re-assemble everything.

Answer by  Amber40 (24961)

If the cv shaft is loose and making noise then it will need to be replaced. This means the wheel needs to be removed and the shaft must be pulled so a new one can be installed.

Answer by  JohnHolmes (2660)

If it recently started it may not have begun to damage itself. You can get a joint repair kit from your local auto parts store that will fix the problem with a minimal cost.

Answer by  harshielha (144)

When inner cv knocks you cannot repair it so has to be replaced.This means that wheels should be removed and shaft have to be pulled and replaced with new one.

Answer by  JD17 (424)

To replace the CV joint, jack up the car. Put on jack stand. Remove tire. Remove the breaks and move aside don't take off break life if you don't have to. unbolt axle shaft and you will be able to remove CV shaft and replace it.

Answer by  Amber40 (24961)

Well joint slack is an indicator of a worn cv joint. This means your should replace the joint before it fails.