How do I adjust the intake and exhaust valve clearance specifications on a Honda VTX 1800?

Answer by  deacon (79)

Remove the air intake hose and search for the adjustment screw. The intake valve should be closed when idling. Inspect the intake valve for debris and ensure the valve is clean.

Answer by  georidescom (93)

You'll need a pair of feeler gauges to do this, and set the clearance to factory spec (check service manual). Remove the valve cover, and rotate the crankshaft until the camshaft is not lifting the exhaust or the intake valve. Using a screwdriver and wrench loosen the valve lash adjuster, and check clearance with your feeler gauge.

Answer by  Amber40 (24961)

You need to get everything out of your way and remove the rocker covers. The motor should be put at top dead center for the side your going to adjust. Then you use a feeler gauge on top of the valves and turn the adjustment nut until it is within specs. Repeat on the other side and re-assemble.

Answer by  dee73 (1062)

Take the intake hose off and look for the screw.Check the valve for any debris. As your car is running adjust the screw. Should be closed while idling.

Answer by  nicholas34 (606)

first you should look it up online specifically google and find out what tools you will need to do so, second you buy these tools if you dont already own them then look up online exactly step by step on how to do this process which i garantee will be so specific its amazing

Answer by  cgrid76hotmailcom (545)

First take the valve cover off.Use a long handle breaker bar to move the engine .through the crank shaft .shims is what the factory uses to do this .And it has to be done right so you dont mess any other parts up. What you want to do is check for play in the values.

Answer by  MechaNick (146)

If you are not mechanically inclined take to a shop. Or you can buy the repair manual for this spacific vehicle and follow instructions, all the specs are there.

Answer by  Gaur (7676)

'Turbo X' Coming soon, the most sophisticated, technologically advanced Turbocharger system for VTX 1800 that will simply leave everything in its dust! Created by the masters of turbochargings – Velocity Racing. Now Scheduling Full Custom VTX Builds! * "X-tech X-vision Design" Tanks, Fenders and Seats * Level I, II, and III Turbo Charger Systems * MaxX121 Big Bore 2 Litre * Nitrous Kits