Can you help me with troubleshooting a dvd player?

Answer by  Ultimist (25)

I can help you to troubleshoot a DVD player, if you tell me what sort of problem(s) you are having with it. Without knowing your problem, I'm afraid I can't be of any assistance. A common fix for DVD's that won't play includes making sure the disc you are trying to play is clean.

Answer by  dannyg28 (3070)

If you get no picture you should make sure the TV is set to the input so the DVD player shows up, if it says no disc, you should check to make sure the disc is seated properly. To troubleshoot i need to know the exact problem.

Answer by  tizona (41)

Sure, but you need to be more specific about what the issue is. First make sure your DVD player is plugged into power. Does the power light turn on?

Answer by  mcr666 (362)

You need to find out the problem. Ince you find out the problem you can then find a list of possible solutions on the troubleshooting page of your dvd owners manual.

Answer by  raj87sk (74)

Yes,i can.For dead players check Power cable ,smps.For reading problems (1)clean the laser pickup(a narrow laser beam should be visible-danderous). (2)check pickup connector wire or replace.(3)check the spindle motor(using to rotate the disk).For stilling problem-check slider motor(for sliding the laser pickup).(4)Check the connectors from mother board to mechanical unit.(5)For open/close problem check op/cl motor.Replace new one for defectives.

Answer by  Benjamin (69)

Your best bet would be to look through the manual for your DVD player. If you don't have it, check online. There are usually troubleshooting charts in them.