Can you help me troubleshoot a Hitachi projection color TV?

Answer by  mooman2679 (1018)

What exactly is it doing to you? If you look in the instruction manual or on the Hitachi website, there are probably troubleshooting instructions to follow.

Answer by  Latin4 (11170)

This is something that you need to do yourself. Take the manual that came with the tv and go to the troubleshoot section and go from there. Also you can use the internet and ask questions someone might have had the same problem. Or call or write the manufacture and see if it's under warrentee.

Answer by  smileram (22)

Well I had a tv repairman come buy the house to look at my tv He removed a few screws from the back and he said the power transformer and a small capacitor next to it is the problem. He showed them to me. They are on a circuit board with three wires going to it. th

Answer by  fishlover49 (643)

In order to help troubleshoot we would need to know what the problem is. Projection TV's often need to be sent to an electronic repair place because of the level of sensitivity to the wires and tubes.

Answer by  fiddlefaddle (883)

To reset your Hitachi projection color TV, unplug your television for ten to fifteen minutes. This should reset it to its factory default settings.

Answer by  kathy97 (48)

Projection TV's need to have lenses cleaned and adjusted about every five years. If color is dim or picture is blurry that could be the problem.