Question by  alli64 (74)

Why won't my Maytag washer do the max extract cycle?


Answer by  paohky1966 (86)

The most common cause of this problem is simply overloading of the machine. Try lessening the next load and see if this helps.


Answer by  JohnJacobs (75)

Being unable to inspect your washer, the most common reason would simply be that the washing machine is overloaded. Try cutting down each laundry load and see if the washing machine is able to then handle extracting all the moisture. Clothing, especially jeans and towels, can become much heavier then anticipated when fully soaked and my impede the extract cycle.


Answer by  Valentine62 (2131)

The most common reason is that the washer is overloaded (too full) and the machine cannot spin out the extra water. Try cutting your loads down to half as much.


Answer by  Tim55 (618)

/it should. See if it is still under waranty. If it is, give Maytag a call. They could set you up with a in house technician or have a new Maytag washer delivered to your home.


Answer by  DackThrombosis (1093)

Are you having a problem with water drainage? This seems to be the main problem with a max extract cycle not working. I would check the drainage hose for clogs. Flush the hose with hot water and see if that helps.


Answer by  Isidro (624)

This could be because the product is having some internal problems and if you use it excessively it could be a result of it and should be let to down heat.


Answer by  ammnivarghese (262)

mostly these types of appliances have the problem with their belts. Beter consult with the dealer and get it repaied it. Also, the reason can be the waste gets choked up in the machine.

You have 50 words left!