add your own answer here
electronics






 

Question by  RyanSnedaker (15)

Why does my Pioneer receiver have no output even though it is powered up?

 
+7

Answer by  Ronaldo91 (345)

Please check all cabled inputs to the receiver, and also check that any inputs that you are using are actually supplying a signal. Once you are sure the device feeding signal to the receiver is functioning, test each input to the receiver individually, one or more of the inputs may be malfunctioning. Additionally check that any speakers are working correctly.

 
+6

Answer by  dee73 (1062)

You may have blown the receiver and speakers.If you have not blown any thing double check the connections, then still nothing you might

 
+6

Answer by  bonjovilover (185)

more than likely there is an issue with the internal amp on your pioneer, if it is new i would call their customer service, it should be under warranty, the other possibility is its wired wrong to speakers.

 
+5

Answer by  Max89 (36)

You will want to check your output cables, if you are hooking your receiver up to speakers you want to check all those cables for damage.

 
+5

Answer by  John42 (194)

the channels on the back of the reciever can be blown the speakers might be blown aswell both are fixable by a radio tech

 
+4

Answer by  mrsmith (15)

First of all you should check signal input to your device (is the source device on). Check whether the right output is used if different outputs are avaliable.

 
You have 50 words left!