Why are the rollers on a BR750 New Holland baler getting hot?

Answer by  ramvaishnav (18)

Check the bearings,for rust,alignment and trueness.If grease nipples are provided,glean the face of grease nipples and pump grease with a high pressure gun.If no grease nipples are provided by the manufacturer,either try to provide them or change the bearings with self lubricating ones.Roller glide path should be clean of rust/dirt

Answer by  ramvaishnav (18)

!) Check the bearings, 2)If OK,Check the alignment of rollers with the gliding path and correct if not good, 3)Clean the rust if any and grease the rollers with gun if nipples are provided 4)If there are no nipples,provide nipples or fit with self lubricating bearings

Answer by  billyb (562)

the rollers may need to be greased with grease gun or the rollers may be out of alignment. also you may have a bad bearing.

Answer by  bb (674)

check to see if the rollers have a grease fitting on them. also check to see if bearings are going out.

Answer by  bb (674)

check to see if the rollers are rusted. also the rollers may need to be greased. check for grease fittings.