What is involved in adding a winch to a 4-wheeler?

Answer by  JohnHolmes (2660)

You will need to bolt it to the frame of the 4 wheeler and make sure that it is well secured. You will also need to run the electric from the battery.

Answer by  JonathanY (12)

Reinforce the frame to handle load being winched, the model may require welding or just bolting it on. If welding take it to a mechanic

Answer by  Lorrennon (79)

Usually they are just bolt on, with some requiring drilling of a couple holes. There is also an electrical hookup, but once again, usually there is a plug that it just plugs directly into.

Answer by  lgyg (45)

First, you will have to connect the six-gauge winch wires to the four wheeler. You then have to connect the red and black wires.