What advice can you give concerning rewiring my RV electrical hookup?

Answer by  carfixer (243)

Make sure you hook up the wires correctly the first time. You can use a test light or a multimeter to help identify the correct wires. 3M makes excellent t-tap connectors for tapping into electrical wires. They are inexpensive and you don't have to use any wire strippers, solder, tools, or anything.

Answer by  moose7276 (190)

First, do a careful and complete inspection of the hookup itself. Are there any frayed, disconnected ends? Are there wires that are completely eroded? Next, add any clamps that can amply secure the wires that could be exposed and eventually come loose from exposure.

Answer by  MechMan3 (885)

When wiring anything on a vehicle, you need to first figure out the amp load of the circuits involved, use quality braided copper wire, if you are relocating the hookup, the wire size must increase accordingly. The most important thing is knowing when to get a professional involved in the repair.

Answer by  Stenu (43)

You should take care that you are skilled enough to do the task by yourself. If not, you should consider to contact a professional.