The drivers side window on my Expedition will not roll down, how do I fix it?

Answer by  Sabharish (1610)

The problem must be probably on the roller which maintains the glass of the window. The lever might have rusted and worn out. It can be replaced by removing the inner cover of the door.

Answer by  JohnHolmes (2660)

There are many things that could cause the window not to roll down. If it is an automatic window it is most likely the motor or the fuse. Check the fuse box to make sure all your fuses are operational. If that does not solve the problem you will need to take the door panel off and replace the motor.

Answer by  doc325 (454)

You first have to determine if the motor is getting power form the switch. Get a wiring diagram and then remove the door panel to get to the window motor. Check for power at the motor with the switch pressed. If there is power then the motor is bad.

Answer by  chrijohn (75)

First I'd check to see if the roller that holds the glass is stuck if it is then you will need to take off the doors inner cover to fix it. If that isn't the problem then your power window motor may need to be replaced.

Answer by  JD17 (424)

disconnect the battery. Take off the door panel. Take off the block panel and you will be able to access the motor to replace.

Answer by  Amber40 (24961)

Find out if it is the switch or the motor. Test the switch with a multimeter and attach a battery to the window motor to see if it moves.

Answer by  oui72 (514)

You may have to remove the door panel to find the mechanical failure. It may be a miss aligned window guide, a faulty wiring, damage switch, damage lifter or just a simple need of WD40. Rarely a motor is damaged.