On my 250 Bayou, how do I adjust the valves?

Answer by  mb (5482)

Figure out if the valve are metric or standard. The valves are at the bottom of the carberators and are on either side of the engine block. You'll need to adjust while idling to get the right adjustment.

Answer by  MechaTech (192)

You're going to need some Allen Wrenches, a good set of sockets. Near the engine, you'll see the rotor piston, unhinge the main exhaust funnel from it (It's clearly marked) and then pull the pin out using a pair of pliers. This will expose and loosen the valve. Remove it.