Is an instrument cluster remove difficult?

Answer by  SAviorSorrOW (77)

there are lots of hidden bolts. just work slow and remember where the bolts go. its basically the whole dash that need to come off.

Answer by  palmerino (637)

No. You will need to remove the dash plastic around it. Then there should be a few screws holding it in. Then unplug the wire harness from the back.

Answer by  worker5579 (13)

An instrument cluster removal is not that difficult within the Mazda brand. I owned a Mazda Protege for six years and removal of the instrument cluster consisted of unscrewing a few screws and pulling. Running under the assumption that the ease of removal holds steady throughout the entire Mazda brand, I would think it is a simple procedure.

Answer by  Amber40 (24961)

In newer cars this can be an extremely long and tedious tasks. The dashes are designed to be easily dissembled. Buy a repair manual if you can.

Answer by  chitraanilkumar (340)

It is very easy to remove instrument cluster let it be any vechile or even air craft. remove the screw lift the cluster with fingner pull out and remve connection

Answer by  japratt (1687)

Yes, this removal could be quite difficult to remove. The cluster is already in a tough place but can also be a challenge to remove since you have to use tools.