How should I do a clip removal on my Ford?

Answer by  6ixk (1156)

The best method I know of is to take a fork and remove the two center prongs. Use that to remove the bumper holdings.

Answer by  MechanicGuy (137)

In general a repair like this isn't easy for someone considers themselves a "novice". If you consider yourself this, you should consult your user manual or call your local mechanic.

Answer by  ajith44 (16)

Start by removing the trim and grill. Then remove the headlights. Take the hood off. If the fenders are bolted on you can unbolt them. If they are welded on, you will have to grind out the welds to get the fenders off. Installation would be the removal in reverse. Be sure to carefully align the hood.

Answer by  Amber40 (24961)

Well if you are going to remove the entire front clip from your car then you should probably invest in some sort of repair manual.

Answer by  thattractorguy (2970)

Start by removing the trim and grill. Then remove the headlights. Take the hood off. If the fenders are bolted on you can unbolt them. If they are welded on, you will have to grind out the welds to get the fenders off. Installation would be the removal in reverse. Be sure to carefully align the hood.

Answer by  laura27 (1216)

You have different kinds of style quick connect clips on ford products such as the fuel/transmission lines. Best thing to do is check with a auto part store/ford store.

Answer by  laura27 (1216)

1. remove trim/grill 2. remove headlights 3. Take hood off. 4. If fenders are bolted on you can unbolt them. If welded on you'll have to grind out the welds to get fenders off. Install the removal in reverse. Make sure that the hood is carefully aligned.

Answer by  mufesh (7)

I have the ford removel keys but the clips on the right side of the radio are damaged i try to remove the radio only the left side comes out