How do you replace Chevy wheel bearings?

Answer by  Samhane (703)

Replacing wheel bearing can vary depending on the model obviously, but usually you will need the correct replacement wheel bearings. You will then remove the tire and strip it down to the basic spindle. The wheel bearing will be the circular device that slipes over spindle with bearings on the inside. Grease accordingly and put back together.

Answer by  QuestionGirl (146)

That's quite simple my friend, You're going to need a set of sockets, that matches your Chevy wheels, assuming you have market brand tires, not after market, this is a fairly straight forward process. It shouldn't take more than a few hours at best. Consult your user manual for more information.

Answer by  jkjk19 (134)

Take the hub off of the car and you need a press to press the old bearing out and then press the new one in.

Answer by  laura27 (1216)

Need correct wheel bearing, remove tire/strip down to basic spindle. Circular device that slips over spindle is wheel bearing with them on the inside, Grease down good, put back together.

Answer by  laura27 (1216)

remove the wheel, hub, and brake calipers off the car. Use a press to press to take old bearing out and then press new bearing in. The grease should be rubber sealed.